Cabrio Washer Model Number # WTW6200SW2 F53 Error Code is normally caused by friction on the drive system causing the motor to overheat. You will have to find the cause of the friction. It could be a bad bearing or items stuck between the wash basket and tub. There are a few other causes of this failure as well. The error means the main control has detected a high temperature from the motor module. Other causes of this failure include bad wiring (the lower wire harness), A bad drive motor/stator, or a bad motor circuit on the control board. If you would like to troubleshoot the F53 error code yourself, you will need an ohmmeter. The guide linked below tells you how to troubleshoot the Whirlpool Cabrio Washer  motor circuit and will help you resolve the problem. The guide is for a Whirlpool Cabrio Washer but the Cabrio, Bravos, and Oasis washers are all the same mechanically. The only differences are cosmetic looks and brand names.

HOW TO TROUBLESHOOT WHIRLPOOL CABRIO WASHER MOTOR CIRCUIT

If you have any questions about this F53 error, feel free to ask a technician in our free repair help chat.